TERRA-EX - IP Audio Decoder

TERRA-EX - IP Audio Decoder

An IP, POE audio decoder which can be used for voice, paging, intercom, music streaming, audio routing, pre-recorded and scheduled announcements, VoIP communication or as a SIP device. Utilise this module by receiving digitised audio from a network and provide an analogue output with I/O or optional RS232 control.

Integrated shoutcast/icecast decoding, scheduler and internal storage are just some of the features of this IP decoder. Optional USB interface is available.

To configure, control and monitor the TERRA-IEX in real-time, this is simply achieved through your favourite web browser making the management of even the most complex environments a simple and straight forward process.

An IP, POE audio decoder which can be used for voice, paging, intercom, music streaming, audio routing, pre-recorded and scheduled announcements, VoIP communication or as a SIP device. Utilise this module by receiving digitised audio from a network and provide an analogue output with I/O or optional RS232 control.

Integrated shoutcast/icecast decoding, scheduler and internal storage are just some of the features of this IP decoder. Optional USB interface is available.

To configure, control and monitor the TERRA-IEX in real-time, this is simply achieved through your favourite web browser making the management of even the most complex environments a simple and straight forward process.

Features

2 balanced line outputs (1 stereo or 2 mono) 

1 stereo line output (3.5 mm mini-jack) for headphone 

Audio output: maximum level +5 dB, bandwidth 20 Hz ~ 20 kHz

Single CAT5/6 cable connectivity for audio and control 

PoE or 24 VDC power supply (if PoE is not available) 

Support G.711, G.722, G.726, G.727, G.729, MP3 audio codec and AAC+ (decoding only) 

 Web browser interface for management and monitor 

SNMP (Simple Network Management Protocol) for device management on IP networks 

USB 2.0 interface for music/message storage, playback and recording 

Internal 80 MB storage for recoding, message storage  

Power LED and Status LED indicators  

3 contact inputs and 1 contact output

Power consumption: 2W 

Weight: 0.95 lb (433g) 

Dimensions (DxHxW): 104 mm x 32 mm x 109 mm

£0.00
£421.72
Earn 0Reward points

QTY

Do you want to be notified when this product is back in stock? Complete the form below and we'll let you know when it is.